Tune your instrument with your microphone and listen to reference pitches.
Reference tones · tap a string to listen
Tuner guide
Tap Start Tuner and allow microphone access. Find a quiet place and keep your device near your instrument.
Play one open string at a time with a steady bow. You can also gently pluck the string.
Make sure the note on screen matches the string you are tuning. For a violin, the open strings are G3, D4, A4 and E5. Tap a string name above to hear its reference pitch.
Tighten the string to raise the pitch.
Check again after each small adjustment.
Loosen the string to lower the pitch.
If the note shown is not the string you are tuning, do not rely on the needle alone: the tuner detects the nearest note. Listen to the reference tone first, and ask a teacher or luthier for help if the string is far from pitch.
If your violin has fine tuners on the tailpiece, use them for small adjustments. Looking at the screw from above, turn it clockwise to tighten and raise the pitch, or counterclockwise to loosen and lower the pitch. Turn a little at a time and play the string again. Never force a screw at the end of its travel.
Traditional violin pegs are tapered and stay in place by friction. Support the pegbox and gently push the peg inward while turning it so it grips. Do not force a stuck peg or push hard enough to strain the pegbox. Geared pegs work differently and generally do not need to be pushed in.
To raise the pitch, turn the peg so the string winds onto it; to lower the pitch, turn it so the string unwinds. On a normally strung violin, viewed directly from the outside of each peg head, the G and D pegs usually turn counterclockwise to tighten, while the A and E pegs usually turn clockwise to tighten; reverse those directions to loosen. Check the way your string is wound, as it may differ.
Make tiny adjustments and check the pitch often. Do not overtighten: a string can break. If a peg sticks, slips repeatedly, or the string is far out of tune, ask a teacher or luthier for help.
Audio is processed in your browser and is not sent to a server.